3D print National Park of American Samoa
National Park of American Samoa on one print: a 141 by 13 km relief of the park and the land around it, with lakes, rivers and land cover in their own colors.
- Region
- American Samoa
- Established
- 1988
- Area
- About 45 km²(17 sq mi)
- Highest point
- Lata Mountain, 963 m(3,159 ft)
- IUCN category
- V, Protected Landscape/Seascape
Seen from above
141 by 13 km, on a 160 mm print
- Taller than life
- The print opens with the Elevation multiplier at 8x so the terrain reads at this size. Set it to 1 for true scale.
- The footprint
- The print covers the rectangle around the park's mapped outline, so some land just outside the boundary is included. Move or resize it in the generator.
Common questions
Is the National Park of American Samoa 3D print free?
Yes. The generator runs in your browser and exports a 3MF file you can open in any common slicer. There is no account or payment.
Does the print cover the whole park?
Yes. It opens on a 141 by 13 km rectangle around the park's outline from OpenStreetMap, so the whole park fits, with some land around it.
Is the park printed at its true height?
It starts at 8 times its true height, about 7.8 mm of relief on a 160 mm print, because true scale looks flat at this size. Set the Elevation multiplier to 1 for true scale.
Can I get an STL instead of a 3MF?
The generator exports 3MF, which keeps each color as its own part. Any slicer can open it and save an STL if you need one.
Sources: Wikidata: National Park of American Samoa, OpenStreetMap: National Park of American Samoa outline, Wikipedia: National Park of American Samoa, Official website, Mapterhorn elevation data
Nearby
