3D print Koning Willem II Stadion

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

1. Scalloped canopy and trusses

   The roof is a row of scalloped bays carried on exposed triangular trusses above the seating. Print friendly adapts the thin truss members; Full detail keeps them for a larger print or a fine nozzle.

2. Stair aisles through the stand

   Radial stair aisles cut through the seating, and recessed portals open in the upper rows. Layers of 0.12 to 0.16 mm help those narrow channels and portal edges stay visible.

3. One piece with the ground

   Koning Willem II Stadion is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

4. Pick the detail for your nozzle

   In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

5. Colors

   Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Koning Willem II Stadion takes the building color.

6. File format

   You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.