A white 3D print of LFF Stadium, a long single grandstand with a shallow canopy, open upper balcony and a flat-roofed office at one end, among the surrounding streets and buildings of Vilnius.

3D print LFF Stadium

A free, printable model of LFF Stadium, a long covered grandstand with an open upper balcony, with the surrounding streets and buildings of Vilnius, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • LFF Stadium model, North view North
  • LFF Stadium model, East view East
  • LFF Stadium model, South view South
  • LFF Stadium model, West view West

The model you print

LFF Stadium in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. One covered grandstand

    The model is a single long stand under a shallow canopy, with four lower seating courses and an open balcony above. Print friendly adapts the thin roof edge and balcony railings to your print scale.

  2. Office end and crest

    A flat-roofed office block closes one end, with a raised sign pier on its corner. A larger print keeps that small pier and the entrance recess readable; 0.12 to 0.16 mm layers help the window bands.

  3. One piece with the ground

    LFF Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. LFF Stadium takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About LFF Stadium

LFF Stadium is a football ground in Vilnius, Lithuania; it is also known as FK Žalgiris' Home Stadium. It took over from the Žalgiris Stadium as FK Žalgiris's home; the club is the city's primary football side. The ground can accommodate 5,067 people and was formerly called Vėtra Stadium as well.

It dates from 1957 and was first named Lokomotyvas. A rebuild in 2004 turned it into Vėtra Stadium, the home ground of FK Vėtra, and from 2005 it hosted matches of the Lithuanian national football team, whose home it remained until 2022. After Vėtra became insolvent in 2010, the Lithuanian Football Federation took over the ground, paying 2.2 million litas (€637,200); the federation then renamed it LFF Stadium.

The federation carried out improvements to meet UEFA Category 3 stadium requirements. It added its headquarters at the ground and replaced the grass pitch with artificial turf, and the capacity was increased to 5,067. A 2015 renewal relaid the turf and updated the lighting. The stadium was renovated again in 2017, and the Eastern stand's seating was reinforced during the 2021 season.

About this model

LFF Stadium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print