A white 3D print of the Derek Pavis Stand at Meadow Lane, with its long cantilevered roof and two magpie panels, among surrounding streets and buildings.

3D print Meadow Lane

A free, printable model of Meadow Lane, centered on its main stand, with the streets and buildings of Nottingham around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Meadow Lane model, North view North
  • Meadow Lane model, East view East
  • Meadow Lane model, South view South
  • Meadow Lane model, West view West

The model you print

Meadow Lane in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Cantilevered main stand

    The model is the long Derek Pavis Stand, with a broad cantilevered roof, tunnel mouths and two magpie panels in the seating. Print friendly adapts the thin canopy edge; Full detail keeps these details on a larger print.

  2. Magpie panels in the seats

    The two magpie silhouettes are raised across the stepped seating. A layer height of 0.12–0.16 mm and a bigger print help the birds and the tunnel surrounds read clearly.

  3. One piece with the ground

    Meadow Lane is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Meadow Lane takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Meadow Lane

Meadow Lane is the Nottingham home of Notts County, a football ground in England. The club has played there since the ground opened in 1910. Its all-seated capacity is 19,841 for EFL games, and the maximum capacity is 20,229. Notts County Ladies also played there from 2014 to 2017.

The ground's record attendance is 47,310, set when Notts lost 1–0 at home to York City in the sixth round of the FA Cup on March 12, 1955. Nottingham Forest's City Ground is three hundred yards (270 meters) away, on the other side of the River Trent. No other pair of English grounds stands so close, and only Dundee's Dens Park and Tannadice Park are closer in the United Kingdom.

The stadium was redeveloped during the early 1990s, when new stands replaced the old Meadow Lane End, the Spion Kop and the County Road Stand. The Main Stand followed in 1994 as the Derek Pavis Stand. It also stages Varsity Series football between Nottingham Trent and the University of Nottingham. Visiting fans normally occupy the Jimmy Sirrel Stand, on the County Road side.

About this model

Meadow Lane is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print