3D print Rogers Forum
A free, printable 3D model of the arena and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Rogers Forum in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Wide, low shape suits larger prints
An arena is usually a broad building, so print size decides how much surface detail survives. Use Full detail on a larger print and Print friendly on a small one.
- Fine layers for edges
A layer height of 0.12–0.16 mm keeps edges and corners crisp.
- One piece with the ground
Rogers Forum is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Rogers Forum takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Rogers Forum
Abbotsford, British Columbia, is home to Rogers Forum, a multi-purpose arena with 7,000 seats. It was formerly known as Abbotsford Centre and as the Abbotsford Entertainment and Sports Centre. Its expected cost was $64.7 million, and construction began on September 24, 2007. Abbotsford voters approved the arena in a vote on November 25, 2006, by a 54.8% majority.
For hockey it seats 7,000, with room to grow to 8,500. Premium options include 20 private suites, 15 boxes, 300 club seats and 2 party suites. The Abbotsford Heat of the American Hockey League played here from 2009 to 2014. The Fraser Valley Bandits of the Canadian Elite Basketball League arrived in 2019, then relocated to the Langley Events Centre ahead of the 2022 season.
The Vancouver Canucks won approval in 2021 to move their AHL affiliate here for the 2021–22 season, and the team became the Abbotsford Canucks. In 2023 the arena was renovated, with a redesigned videoboard, a new fascia ribbon board display and new seats.
About this model
Rogers Forum is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
