3D print Rugby Park
A free, printable model of Rugby Park's East Stand, a long stand with a tapered cantilever roof, among the streets and buildings of Kilmarnock, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Rugby Park in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 4 mm
- Scale
- 1:3,750
4 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Cantilever roof and frames
The model is a single long stand under a thin cantilever roof, with exposed lattice frames above it. Print friendly adapts the slender roof members; a larger print keeps the frame depth legible.
- Open undercroft
The back of the stand opens below the seating on steel rakers rather than a solid wall. Print slowly around these thin diagonals, and use 0.12–0.16 mm layers to keep them clean.
- One piece with the ground
Rugby Park is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Rugby Park takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Rugby Park
Rugby Park is a football stadium in Kilmarnock, Scotland, and the home of Kilmarnock F.C. of the Scottish Premiership. Its 15,003 places make it Scotland's 7th-largest football ground. The ground was first used in 1899 and has also staged concerts, rugby union and international football matches. In 2002 the club built the Park Hotel, a four-star hotel complex beside the ground.
A major redevelopment in 1994 and 1995 turned the ground into an all-seater stadium. Three new stands went up, named Moffat, Chadwick and East, and the renovated ground opened with a friendly against Blackburn Rovers. The capacity stood at 18,128 after the rebuilding. Later changes included underground heating in 1999, an artificial pitch in the summer of 2014 and safe standing from November 2019.
The West Stand took the name Frank Beattie Stand in August 2010, honoring the former player who captained Kilmarnock to the Scottish League Championship in 1965. Rugby matches have also been played there, including Scotland against Georgia in July 2016, and the ground has hosted four international football matches for Scotland in 1894, 1910 and 1997.
About this model
Rugby Park is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
