3D print Brighton railway station
A free, printable model of Brighton railway station, with its long curved train-shed roof and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Brighton railway station in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Ribbed curved train-shed roof
The roof over the platforms is a long, curved, ribbed shape. Print friendly adapts its thin ribs to the print scale; Full detail keeps every one, which suits a larger print and a 0.12 mm layer height.
- Slender columns under the roof
The front canopy and roof stand on rows of slim columns. Printing slowly and at a larger size helps these small supports come out cleanly.
- One piece with the ground
Brighton railway station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Brighton railway station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Brighton railway station
The main railway station for Brighton and Hove stands in East Sussex, England. Three lines end here: the Brighton Main Line at its southern end, the East Coastway line at its western end, and the West Coastway line at its eastern end. The London & Brighton Railway built the station in 1840–41, with its own goods station, railway works and locomotive depot, on a difficult site at the northern edge of Brighton.
The passenger station opened for trains to Shoreham on May 12, 1840, and to London on September 21, 1841. David Mocatta drew up its three-storey Italianate building in 1839–40, and it housed the railway company's head office. The building still stands, though later additions have largely hidden it. The station is said to resemble Nine Elms station, which William Tite designed.
The sloping site left room for only a limited number of extra platforms, so by the late 1870s the platforms were lengthened to take two trains each. One overall roof took the place of three separate ones in 1882–83. A large double-spanned curved roof of glass and iron spans every platform; it underwent major renovation in 1999 and 2000. It was Grade II* listed on April 30, 1973.
About this model
Brighton railway station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





