3D print Scandinavium
A free, printable model of Scandinavium, a round arena under a sweeping saddle roof, among the surrounding streets and buildings of central Gothenburg, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Scandinavium in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 9 mm
- Scale
- 1:3,750
9 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Saddle roof and thin rim
The model's roof is a shallow saddle with a thin, curving rim. Print slowly around the rim, and keep layers at 0.12–0.16 mm so it stays clean.
- Round columns and fine ribs
Forty round columns stand clear of dense vertical ribs around the hall. Print friendly adapts the finest ribs; a larger print keeps the columns and their bays distinct.
- One piece with the ground
Scandinavium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Scandinavium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Scandinavium
Scandinavium is an indoor arena in Gothenburg, Sweden, in the Heden district of the Centrum borough. Construction began in 1969 after decades of delays, and the building was inaugurated on May 18, 1971. It serves as the home arena of Frölunda HC in the Swedish Hockey League and hosts the Göteborg Horse Show each year. The club has taken the Le Mat Trophy four times while playing at the arena, the fourth of those in 2019.
The arena has been chosen as a championship venue at least fifty times. Handball and ice hockey world championships, European championships and Davis Cup finals have all taken place there, and in 1985 it staged the Eurovision Song Contest. When it was completed it ranked as northern Europe's largest covered arena, with room for 14,000 spectators. The construction cost 31 million Swedish kronor and left a budget deficit of eight million.
Its sweeping shape comes from a saddle roof in the form of a hyperbolic paraboloid, carried by a prestressed cable net. The cables are anchored in a curved reinforced concrete ring beam. Its cross-section is 3.5 by 1.2 meters, or 11.5 by 3.9 ft. That ring rests on forty round columns and four stiff pylons; both are visible in the facade. The building rises 14 meters (46 ft) from the event floor to the top of the roof.
About this model
Scandinavium is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
