3D print the Silesian Stadium
A free, printable model of the Silesian Stadium, its flared upper ring on leaning struts above a covered oval bowl, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 14 mm
- Scale
- 1:4,375
14 mm tall on a 160 mm print
Make this print opens the generator on a 700 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Flared ring on leaning struts
The upper compression ring flares above the roof on forty outward-leaning struts. Print friendly adapts these thin members; printing slowly with good cooling keeps the ring steady as it rises.
- Elliptical opening in the roof
The roof closes round a large elliptical opening above the pitch and track, with a thin inner edge. Layers of 0.12 to 0.16 mm keep that edge and the radial ribs crisp.
- One piece with the ground
The Silesian Stadium is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Silesian Stadium takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Silesian Stadium
Silesian Stadium lies inside Silesian Park in Chorzów, Poland. Refurbishment completed in October 2017 left it fully covered, with room for 54,378. For many decades it served as Poland's national stadium and many Poland national team matches were played there, until Warsaw's National Stadium opened and took over that role, and it was out of operation between 2009 and 2017 during its reconstruction.
The stadium belongs to the same project as the park: plans were drawn up in 1950 by Julian Brzuchowski, building began in 1951 and the ground opened in 1956, inaugurated on July 22, 1956 with a fixture against East Germany. In 1993 it was officially branded the Polish national stadium, given the state of Warsaw's own venue. A 384-meter (420-yard) motorcycle speedway track used to run round the pitch, and the first World Final there, in 1973, drew the largest crowd in the history of world speedway.
The modernization started in 2009 so that the ground could host matches at UEFA Euro 2012. It gave the stadium a new roof of 43,000 square meters, fresh stands, lighting, video screens and better sound, and the new roof collapsed in 2011, delaying the project until it was completed in 2017. The cost ran from an original 415 million złoty planned for autumn 2011 to around 650 million złoty. A traditional track has replaced the speedway circuit, and the ground holds UEFA Category 4 status, staging the Diamond League's Kamila Skolimowska Memorial each year.
About this model
The Silesian Stadium is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
