3D print 1000 de La Gauchetière
A free, printable 3D model of 1000 de La Gauchetière and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
1000 de La Gauchetière in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 205 m
- On a 160 mm print
- 57 mm
- Scale
- 1:3,750
205 m of 1000 de La Gauchetière, 57 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, fine details
A skyscraper is slender and tall. Print friendly adapts thin parts and small details to the print scale; printing slowly with layers of 0.12–0.16 mm keeps vertical detail crisp.
- One piece with the ground
1000 de La Gauchetière is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 1000 de La Gauchetière takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 1000 de La Gauchetière
The skyscraper 1000 de La Gauchetière stands in downtown Montreal, Quebec, Canada, and takes its name from its street address on De la Gauchetière Street West. It rises 205 m (673 ft) over 51 floors, measured from average ground level near the first floor up to the roof. Under the height definition the city uses, which leaves out spires, it ranks as Montreal's tallest building. Under the most widely used international definition, which counts spires, it is second.
Lemay & Associates and Dimakopoulos & Associates designed the tower, and Pomerleau Inc. built it in 1992. It is a postmodern design, with a distinctive triangular copper roof and four rotunda entrances capped with copper at the base corners. Their design draws on Mary, Queen of the World Cathedral, which stands to the building's north.
The structural core is concrete, with steel used for the remaining floorplates. Recessed corners make room for as many as 12 corner offices on each floor, and 22 elevators serve the building. The atrium, a popular feature, houses a large rink for ice skating. The tower also has a bus terminal and connections to other buildings in the underground city.
About this model
1000 de La Gauchetière is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
