3D print 110 The Queen's Walk
A free, printable model of 110 The Queen's Walk, the leaning former City Hall beside the Thames near Tower Bridge, with the More London buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 45 m
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
45 m of 110 The Queen's Walk, 15 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A leaning, rounded shell
The walls slope and curve instead of rising square. Print friendly adapts the shell to a small print; on a larger one, Full detail and layers of 0.12 to 0.16 mm keep the lean smooth.
- One piece with the ground
110 The Queen's Walk is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 110 The Queen's Walk takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 110 The Queen's Walk
The building at 110 The Queen's Walk was called City Hall for most of its life. It stands in Bermondsey, London, and housed the Greater London Authority from July 2002 to December 2021. Norman Foster designed it; it occupies ground beside the Thames on the south bank, close to Tower Bridge, within the More London development of offices and shops. The State of Kuwait has owned the site since 2013.
Building the hall cost £43 million, on ground that had held wharves serving the Pool of London. Its rounded, tilted form was supposedly intended to shrink the surface area and improve energy efficiency, yet the glass double skin uses more energy than the shape saves. It has been compared to a helmet, a misshapen egg and a woodlouse. A walkway 500 meters (1,600 ft) long spirals up ten storeys to an exhibition space and an open deck for viewing.
The assembly's debating chamber occupied the base of that spiral, with members' desks and seats set in a circle. The walkway gives views of the interior and was intended to symbolize transparency, a device Foster also used for the rebuilt Reichstag. Film makers have used the building too: in 2015 it played the Joint Intelligence Service headquarters in Spectre.
About this model
110 The Queen's Walk is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
