3D print 1250 René-Lévesque
A free, printable model of 1250 René-Lévesque and its surroundings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
1250 René-Lévesque in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 199 m
- On a 160 mm print
- 61 mm
- Scale
- 1:3,750
199 m of 1250 René-Lévesque, 61 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall tower, slow printing
A tall tower rewards slow printing with good cooling and 0.12–0.16 mm layers. Try "Print friendly" if thin parts at the top are a concern.
- One piece with the ground
1250 René-Lévesque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. 1250 René-Lévesque takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About 1250 René-Lévesque
1250 René-Lévesque, once called the "IBM-Marathon Tower," is a 47-story skyscraper in downtown Montreal, Canada. Its roof height is 199 meters without the spire and 226.5 meters with it. Under the National Building Code that Montreal follows, which leaves out decorative spires, it is the second-tallest skyscraper in Montreal. The international CTBUH counts the spire, which makes it Montreal's tallest building.
Kohn Pedersen Fox Associates designed the tower, which was built between 1988 and 1992 and completed in 1992. IBM and Marathon Realty led the project, which cost $250 million and aimed to bring IBM's Montreal operations together, moving 1,000 staff from Place Ville Marie. Its downtown location marks a visual boundary where the commercial center gives way to the west side, which was historically residential, an idea inspired by the firm's Westend Tower in Frankfurt, Germany. Bell Centre and Windsor Station are its neighbors.
Its architecture mixes postmodern and neo-modern styles. The west side is a wall clad in granite, with square windows and irregular setbacks, while the east side is a curved glass curtain wall that faces the city center. A spire runs along the north side and reaches 31 meters beyond the rooftop. Inside, a four-story atrium holds a bamboo winter garden, and the building links to Montreal's Underground City as well as the Bonaventure metro station.
About this model
1250 René-Lévesque is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
