3D print Adelaide Town Hall
A free, printable model of Adelaide Town Hall, its roofs and clock tower, and the city streets and tall buildings around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About Adelaide Town Hall
The town hall stands on King William Street in the South Australian city of Adelaide. This civic building holds the Lord Mayor's chambers and the Adelaide City Council offices, along with rooms for meetings, concerts and public functions. It is built mainly of local freestone and bluestone.
Edmund Wright and Edward Woods won an architectural competition, and construction began in March 1863. Governor Dominic Daly officially opened the hall on June 20, 1866. Their Classical Revival design has a symmetrical, colonnaded facade with Corinthian detailing. Between 1869 and 1882 further wings and council chambers were added.
The Albert Tower is a clock and bell tower approximately 46 m (150 feet) high. The council named it to honor Prince Albert, who died in 1861, and a clock was installed in 1935. In June 1964, on their Australian tour, the Beatles appeared on its balcony. The auditorium has a pipe organ installed in 1990.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 12 mm | 1:3,750 |
| 200 mm | 15 mm | 1:3,000 |
| 256 mm | 19 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- A clock tower with a lantern
- The slender tower ends in a small domed lantern. Print slowly with good cooling, and use a bigger print size or 0.12–0.16 mm layers to keep the top crisp.
- Many small roof forms
- Several pitched roofs and small rooftop details make for fine detail. Print friendly adapts the thinnest parts to your scale; Full detail suits a large print.
- One piece with the ground
- Adelaide Town Hall is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Adelaide Town Hall takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
Adelaide Town Hall is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there an Adelaide Town Hall STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. Adelaide Town Hall grows with the print: about 12 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
