A white 3D print of the Alaca Imaret Mosque, a boxy mosque with two large domes and a row of smaller domes over an arched portico, hemmed in by taller buildings.

3D print the Alaca Imaret Mosque

A free, printable model of the Alaca Imaret Mosque, with its two large domes and domed portico, and the dense streets and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Alaca Imaret Mosque model, North view North
  • Alaca Imaret Mosque model, East view East
  • Alaca Imaret Mosque model, South view South
  • Alaca Imaret Mosque model, West view West

© OpenStreetMap contributors

The model you print

Alaca Imaret Mosque in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Thin columns under small domes

    The portico stands on slender columns beneath a row of small domes. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print or with a fine nozzle.

  2. Smooth domes need fine layers

    Two large domes and several small ones dominate the roofline. A layer height of 0.12–0.16 mm keeps their curves smooth.

  3. One piece with the ground

    The Alaca Imaret Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Alaca Imaret Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Alaca Imaret Mosque

The Alaca Imaret Mosque is an Ottoman-era mosque in Thessaloniki, Greece. Its Turkish name translates as 'Colorful Mosque', and it also goes by the name Ishak Pasha Mosque. The mosque was completed in the 1480s under the direction of Ishak Pasha, who ordered it built in 1484 or 1487.

The complex consists of a mosque and an imaret, a public charity kitchen. The mosque follows a reverse T plan that is common in early Ottoman architecture. Two large domes cover the prayer hall, and a portico in front is covered by five smaller domes. The mosque once had a single minaret, which was destroyed after 1912, once the Greek Army had conquered Thessaloniki and it had become part of the modern Greek state.

About this model

The Alaca Imaret Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Thessaloniki

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits