A white 3D print of the Hamza Bey Mosque, a domed building with an arcaded side, tucked between larger buildings and city streets.

3D print the Hamza Bey Mosque

A free, printable model of the Hamza Bey Mosque, its dome and arcaded side, and the streets and larger buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Hamza Bey Mosque model, North view North
  • Hamza Bey Mosque model, East view East
  • Hamza Bey Mosque model, South view South
  • Hamza Bey Mosque model, West view West

© OpenStreetMap contributors

The model you print

Hamza Bey Mosque in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Ribbed dome and small domes

    A large ribbed dome and two small domes sit beside a side of slender arches. Full detail keeps the ribs and arches on a larger print; Print friendly simplifies the thinnest parts.

  2. Fine arches need thin layers

    The arched side is delicate at small sizes. A layer height of 0.12–0.16 mm keeps the arches crisp, and a larger print size helps them survive.

  3. One piece with the ground

    The Hamza Bey Mosque is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Hamza Bey Mosque takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Hamza Bey Mosque

The Hamza Bey Mosque is a former mosque in Thessaloniki, Greece. It was built between 1467 and 1468, during the Ottoman era. Hafsa Hatun, daughter of Isa Bey Evrenosoğlu, ordered its construction, though it carries the name of Hamza Bey, the Beylerbey of Rumeli. The 1820s saw it abandoned.

Earthquakes and fires damaged it in later years, and it was rebuilt in 1620 with a madrasa added. After the Greek-Turkish population exchange it ceased to serve as a place of worship and passed to the National Bank of Greece. It gained protected-monument status in 1926, yet private owners bought it in 1928.

The building was then used as a cinema for several decades and suffered extensive modifications. Many in Thessaloniki commonly call it Alkazar, the name of that cinema. A dome covers the building, and its minaret was removed after 1923. The Greek Ministry of Culture received the building in 2006, and restoration work began.

About this model

The Hamza Bey Mosque is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Thessaloniki

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits