A white 3D print of the Albert Memorial, a tall Gothic canopy with a slender spire and a seated statue beneath it, standing on steps in parkland.

3D print the Albert Memorial

A free, printable model of the Albert Memorial, a tall Gothic spire on a stepped base, standing in parkland with paths around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Albert Memorial model, North view North
  • Albert Memorial model, East view East
  • Albert Memorial model, South view South
  • Albert Memorial model, West view West

© OpenStreetMap contributors

The model you print

Albert Memorial in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
54 m
On a 160 mm print
15 mm
Scale
1:3,750

54 m of the Albert Memorial, 15 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Spire and many small pinnacles

    The canopy rises to a thin spire topped by a cross, with small pinnacles around it. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep them sharp.

  2. One piece with the ground

    The Albert Memorial is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Albert Memorial takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Albert Memorial

The Albert Memorial, a ciborium in the Gothic Revival style, stands in Kensington Gardens, London, honoring Prince Albert of Great Britain. The Royal Albert Hall lies just to its south. Queen Victoria commissioned it after her husband died in 1861, and Sir George Gilbert Scott designed it.

The memorial is shaped like a richly decorated canopy, or pavilion, that rises 176 feet (54 m), of the type placed over a church's high altar. Beneath it, a statue of Albert faces south. It took more than ten years to finish.

Queen Victoria herself opened the memorial in July 1872, and the statue of Prince Albert, the husband she was honoring, was ceremonially "seated" a few years later. The project cost £120,000, which public subscription met, and the memorial has held Grade I listed status since 1970.

About this model

The Albert Memorial is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in London

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits