3D print Alexandra Palace
A free, printable model of Alexandra Palace with its tall mast, set in the parkland, lake and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Alexandra Palace in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 24 mm
- Scale
- 1:4,063
24 mm tall on a 160 mm print
Make this print opens the generator on a 650 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender lattice mast
The tall mast at the western end is the thinnest part of the model. Print friendly adapts it to the print scale. For Full detail, print larger and slowly, with good cooling.
- Domes and a ribbed vaulted roof
The long roof has many fine ribs, and small domes sit at the corners. A 0.12-0.16 mm layer height keeps these lines crisp, and a bigger print keeps them distinct.
- One piece with the ground
Alexandra Palace is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Alexandra Palace takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Alexandra Palace
Alexandra Palace is a venue for entertainment and sport in north London. It lies in the London Borough of Haringey, midway between Wood Green and Muswell Hill. John Johnson and Alfred Meeson were its designers. It opened in 1873, but after a fire soon after the opening, Johnson rebuilt it, and it reopened on May 1, 1875. It was meant to be "the People's Palace" and goes by the nickname "Ally Pally". It became a Grade II listed building in 1996.
The owners planned a sale of the palace and Alexandra Park for development in 1900, but a group of neighboring local authorities acquired them. An Act of Parliament then created a charitable trust, with the duty to keep both open for free public use and recreation forever.
The BBC took a lease on part of the palace from the trustees in 1935, for the production and transmission of its new television service. The world's first regular public "high-definition" television service began there in 1936. It used 405-line monochrome analogue television, which was the first fully electronic system in regular broadcast use. The Great Hall and West Hall usually host exhibitions, concerts and conferences.
About this model
Alexandra Palace is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





