3D print Plough Lane
A free, printable model of Plough Lane in Wimbledon, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Plough Lane in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Eastern floodlight masts
Two tall lighting masts rise above the low stands. Print slowly and cool well for these thin parts, or use Print friendly to adapt their open lamp banks.
- Thin canopy and terrace rows
The canopy is a thin ribbon around three low stands. A larger print and layers of 0.12 to 0.16 mm help the roof edge and the stepped seating rows stay sharp.
- One piece with the ground
Plough Lane is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Plough Lane takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Plough Lane
Plough Lane is a multi-purpose football ground in Wimbledon, southwest London. AFC Wimbledon have played there since November 3, 2020, and the London Broncos rugby league side began sharing it in 2022. The ground stands about 200 yards east of the original Plough Lane, where Wimbledon F.C. played from 1912 until 1991.
The permanent west stand was built first: a four-story structure with general admission on the first floor and hospitality above, seating 4,267. Three semi-permanent stands filled the rest of the ground, lifting the initial capacity to 9,215. The south stand holds the most vocal home supporters and includes a safe standing area, the east stand has a family area, and away fans are in the isolated north stand.
The ground's first match, on November 3, 2020, was a 2–2 draw with Doncaster Rovers; Joe Pigott scored the opening goal in the 18th minute. No fans could attend because of national COVID-19 restrictions. The first match with fans present came on May 18, 2021, when 2,000 watched a friendly against Liverpool's under-23 side. The stadium became the Cherry Red Records Stadium in September 2021.
About this model
Plough Lane is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
