3D print Arraya Tower
A free, printable model of Arraya Tower and the tall buildings and streets around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Arraya Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 300 m
- On a 160 mm print
- 80 mm
- Scale
- 1:3,750
300 m of Arraya Tower, 80 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Thin spire and slanted crown
A slim spire and a leaning strut rise from the slanted top of the tower. Print slowly with good cooling, and use a 0.12–0.16 mm layer height to keep the spire crisp.
- Diagonal bracing on the shaft
Diagonal braces cross the sides of the tall, narrow shaft. A larger print keeps them distinct, and "Print friendly" adapts thin parts to the print scale.
- One piece with the ground
Arraya Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Arraya Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Arraya Tower
Arraya Tower is a skyscraper in Kuwait City, Kuwait, completed in 2009. It works as a grade-A office tower, with sixty stories and a height of 300 meters, which includes a 45-meter spire. Until Al Hamra Tower went up in 2011, it was the tallest tower in Kuwait.
The principal architect was Curtis W. Fentress, working for Fentress Architects, and the primary contractor was Ahmadiah Construction. Work began in February 2005, and by August 22, 2008, the tower was topped out. The exterior mixes steel rods, green glass and white marble. The tower complements the existing 130-meter-high Arraya Tower, which houses offices and a Courtyard by Marriott hotel, and also the Arraya Ballroom and the Arraya Shopping Mall.
About this model
Arraya Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
