3D print the Bahria Icon Tower
A free, printable model of the Bahria Icon Tower, a 62-story glass tower beside a park, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bahria Icon Tower in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 74 mm
- Scale
- 1:3,750
74 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Sloping crown blade
The tower ends in a sloping concrete blade with a short tip and roof slabs below it. Full detail keeps the slab gaps and slender tip; Print friendly adapts them to the print scale.
- Tall, slender shaft
The model is very tall for its footprint, with fine horizontal floor bands on the shaft. Print slowly with good cooling for the upper floors, and use a 0.12–0.16 mm layer height.
- One piece with the ground
The Bahria Icon Tower is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Bahria Icon Tower takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Bahria Icon Tower
Clifton, a seaside municipality of Karachi, Pakistan, contains the Bahria Icon Tower, a skyscraper complex. The main tower has 62 stories, making it Pakistan's tallest building and one of South Asia's tallest. An adjacent 42-story building is part of the complex, which the Bahria Town Group owns. The plot covers four acres beside Bagh Ibne Qasim park; the shrine of the 8th-century mystic Abdullah Shah Ghazi is next door.
Work on the tower began in 2009. The build was slow and drew allegations of corruption against Malik Riaz, the Bahria Group's owner, while foundation excavations caused traffic inconvenience. The tower reached its top in October 2017. A small fire broke out in November 2018 during installation of a marriage hall and cinema.
The main building holds 40 floors of serviced apartments and 10 floors of serviced corporate offices. It also contains a shopping mall, a high-speed double-decker elevator and Pakistan's highest located terraced restaurant. The tower rises 62 floors above ground and has 7 basement levels. Reinforced concrete and a glass facade form the structure.
About this model
The Bahria Icon Tower is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
