Mazar-e-Quaid in 3D
Mazar-e-Quaid appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Mazar-e-Quaid may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 12 mm
- Scale
- 1:3,750
12 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Large dome on a stepped base
The big dome rests on a tall block with a pointed arch entrance and wide stairs. The curved dome prints best with a fine layer height of 0.12–0.16 mm, and a larger print size keeps the arch crisp.
- One piece with the ground
Mazar-e-Quaid is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Mazar-e-Quaid takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Mazar-e-Quaid
The final resting place of Pakistan's founder, Muhammad Ali Jinnah, is Mazar-e-Quaid, which is also called the Jinnah Mausoleum or the National Mausoleum. Its name means Tomb of the Leader in Urdu. Its design is traditional, with only a slight modernist influence, and it was finished in 1971.
Besides Jinnah's own tomb, the complex has the tomb of his sister Fatima Jinnah and the tombs of the first prime minister, Liaquat Ali Khan, and the eighth, Nurul Amin. Sardar Abdur Rab Nishtar, a Muslim League stalwart from Peshawar, also has a tomb there. It ranks among the city's most popular tourist sites.
The mausoleum is in central Karachi's Jamshed Quarters, on the northern side of the colonial-era core where Muhammad Ali Jinnah Road ends. A big neo-Mughal garden surrounds it, and large traffic rotaries sit at three of its four corners. In 1957 the government held an international competition for the design.
About this model
Mazar-e-Quaid is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline

