3D print the Banqueting House
A free, printable model of the Banqueting House, a low flat-roofed hall on Whitehall in London, with the buildings along the street, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- On a 160 mm print
- 7 mm
- Scale
- 1:3,750
7 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A broad, flat-roofed hall
A low, wide hall gains little height on the plate, so the street front carries the detail. A bigger print gives it more room.
- Layers for the roofline
The top edge is the first thing the eye follows. Layers of 0.12–0.16 mm keep it clean, and printing slowly helps the long straight walls.
- One piece with the ground
The Banqueting House is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Banqueting House takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Banqueting House
The Banqueting House stands on Whitehall, in central London's City of Westminster. It is the only large part left of the Palace of Whitehall, where English monarchs lived from 1530 to 1698, and the best-known survivor among the banqueting houses built for elaborate entertaining. It is a national monument with public access, listed Grade I.
Work began in 1619 to a design by Inigo Jones, whose style drew on Andrea Palladio, and it was finished in 1622, costing £15,618. It is important in English architecture as the first structure finished in the classical Palladian style. Peter Paul Rubens added paintings to the interior ceiling in the 1630s. In the 19th century the outside was refaced in Portland stone, with the original façade details kept.
The design is classical, with an essentially flat roof and a balustrade along the roofline. The street front carries Corinthian columns above Ionic ones on a high rusticated basement, dividing seven bays of windows. The building has three floors: low cellars and store rooms, the double-height banqueting hall above, and a secondary floor over the hall. Historic Royal Palaces, an independent charity, cares for the building.
About this model
The Banqueting House is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
