3D print Berlin Victory Column
A free, printable model of the Berlin Victory Column on its round base, with the roundabout, lawns and nearby buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Berlin Victory Column in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 67 m
- On a 160 mm print
- 18 mm
- Scale
- 1:3,750
67 m of Berlin Victory Column, 18 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Tall shaft and slender statue
A tall, narrow shaft carries a small, slender figure at the top. Print friendly adapts the thin figure to the print scale; Full detail keeps it, which suits a larger print. Print slowly with good cooling for the top.
- One piece with the ground
Berlin Victory Column is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Berlin Victory Column takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Berlin Victory Column
The Victory Column (Siegessäule in German) is a monument in Berlin, Germany. Heinrich Strack drew the design, begun after 1864, to celebrate Prussia's defeat of Denmark in the Second Schleswig War. The column was inaugurated on September 2, 1873, by which time Prussia had also beaten Austria in 1866 and France in 1870–71. Those later victories led to the addition of a bronze Victoria, the Roman goddess of victory, designed by Friedrich Drake. Berliners nicknamed the statue Goldelse, meaning something like "Golden Lizzy".
The base, of polished red Swedish granite, measures 18.8 meters on each side and 7.2 meters in height, with four bronze reliefs. On it stands a round hall of 16 granite columns, encircled by a glass mosaic by Anton von Werner. Four sandstone column sections rise above the hall. The first three hold 20 gilded gun barrels each, from the Danish, Austrian and French victories. Its cost was 1.8 million gold marks.
At first the column occupied Königsplatz, which is now Platz der Republik. In 1938 and 1939 it was moved to its site at the Großer Stern, a roundabout, and another 6.5 meters were added, giving it a height of 66.89 meters. World War II left it with little damage. Four tunnels give pedestrians access to the column, and a spiral staircase climbs to a viewing platform beneath the statue.
About this model
Berlin Victory Column is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





