3D print Bern Minster
A free, printable model of Bern Minster with its tall tower and the packed rooftops of the surrounding old city, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Bern Minster in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 101 m
- On a 160 mm print
- 27 mm
- Scale
- 1:3,750
101 m of Bern Minster, 27 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender spire and pinnacles
The tower ends in a tall, narrow spire ringed by small pinnacles. Print friendly adapts the thinnest tips to the print scale; Full detail keeps them for a larger print. Print slowly so the tip can cool.
- Flying buttresses along the nave
Thin buttresses run along both sides of the long roof. A layer height of 0.12–0.16 mm keeps their edges crisp, and a larger print size keeps more of the gaps between them.
- One piece with the ground
Bern Minster is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Bern Minster takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Bern Minster
Bern Minster, known in German as Berner Münster, is a Reformed Protestant cathedral in Bern's old city, on the Aare peninsula's southern side. Its Gothic construction started in 1421, yet the single tower, 100.6 m (330 ft) high, was not finished until 1893. That height makes it the tallest cathedral in Switzerland, and it carries the status of Cultural Property of National Significance in the country.
The minster is a basilica with three naves and no transept. It measures 33.68 m (110.5 ft) across and 84.2 meters (276 ft) in length. Its west façade dominates Münsterplatz, while the Münsterplattform lies along the south side. Fourteen flying buttresses carry the walls of the central nave. Most of the building is local sandstone and the vaults are brick; Ostermundigen supplied most of the stone, from a quarry there.
Work began on March 11, 1421, under the Strasbourg master builder Matthäus Ensinger, as plans were made for a new and larger church. The central nave was done by 1575, and building then paused for almost three centuries. The 19th century brought the octagonal upper tower, also Gothic in style, and the bell tower, which holds the largest bell in Switzerland, was only completed in 1893.
About this model
Bern Minster is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline


