Blackfriars station in 3D
Blackfriars station appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Blackfriars station may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- On a 160 mm print
- 4 mm
- Scale
- 1:5,000
4 mm tall on a 160 mm print
Make this print opens the generator on a 800 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Long bridge deck and piers
The station is a long, narrow span over water. A larger print size keeps the repeated roof ribs and the piers distinct; Landmark detail set to Print friendly keeps the thinnest parts sturdy.
- One piece with the ground
Blackfriars station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Blackfriars station takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Blackfriars station
Blackfriars is a railway station in the City of London, linked to an Underground station of the same name. Its platforms reach across the River Thames, stretching along Blackfriars Railway Bridge, and no other London station does this. The bridge sits slightly downstream of Blackfriars Bridge, and entrances serve both banks.
The main line station opened on May 10, 1886 under the name St. Paul's, built alongside a new railway bridge by the London, Chatham and Dover company. The bridge carried seven tracks over five arched spans. The Underground station had opened earlier, in 1870, when the Metropolitan District Railway arrived. The main line station was renamed Blackfriars on February 1, 1937.
The station was rebuilt in the 1970s, and the older railway bridge was closed to trains in 1971. A larger refurbishment ran from 2009 to 2012, extending the platforms across the bridge and adding a new entrance on the South Bank, which opened in 2011. Since it straddles the river, the station lies in two areas, the City of London and the London Borough of Southwark.
About this model
Blackfriars station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline





