3D print Borgund Stave Church
A free, printable model of Borgund Stave Church, with its stacked shingled roofs and tower, standing in open ground with roads and a few buildings nearby, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Borgund Stave Church in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 5 mm
- Scale
- 1:3,750
5 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Spire and curved roof ornaments
A slim spire and four curved ornaments rise from the roof peak. They are the thinnest parts of the print, so print slowly with good cooling, or choose Print friendly to adapt them.
- Layered shingle roofs
The tiered roofs have many fine horizontal lines. A larger print size and a layer height of 0.12–0.16 mm keep those steps crisp.
- One piece with the ground
Borgund Stave Church is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Borgund Stave Church takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Borgund Stave Church
Borgund Stave Church, a former parish church in Lærdal Municipality, Vestland county, Norway, dates to about the year 1200 and served as Borgund's village church, first Catholic and later Church of Norway. Its religious functions moved to a newer Borgund Church nearby in 1868. It was later restored, conserved and made into a museum.
Its walls are vertical wooden boards, called staves, which gives the building type its name. The four corner posts are joined by ground sills on a stone foundation, and tar distilled from pine coats the outer timber in protective layers and darkens it. The church follows a basilica plan, with a chancel and apse added in the 14th century.
It is classed as a stave church of the Sogn type with three naves. The roofs are tiered, overhanging and steeply pitched, clad with shingles, and topped by a shingle-roofed tower. The grounds hold Norway's sole surviving free-standing bell tower of stave construction. A society dedicated to preserving ancient Norwegian monuments funds and runs the church.
About this model
Borgund Stave Church is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





