A white 3D print of Sør Arena, a rounded stadium with an open center and a broad roof ring, set among surrounding streets and buildings.

3D print Sør Arena

A free, printable model of Sør Arena and the surrounding streets and buildings, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Sør Arena model, North view North
  • Sør Arena model, East view East
  • Sør Arena model, South view South
  • Sør Arena model, West view West

The model you print

Sør Arena in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
8 mm
Scale
1:3,750

8 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open bowl and thin canopy edge

    The model has an open center beneath a broad roof ring with a thin inner edge. Print friendly adapts the slender roof supports and balcony rails at small scales.

  2. Stair aisles in two tiers

    Two seating tiers are split by a pale balcony, with many narrow stair aisles. A 0.12–0.16 mm layer height keeps the steps and rails crisp.

  3. One piece with the ground

    Sør Arena is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Sør Arena takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Sør Arena

Sør Arena is an all-seater football stadium at Torsvika in Kristiansand, Norway. It holds 14,563 spectators and is the home ground of IK Start. Kjell Kosberg designed the building, which resembles Aker Stadion in its architecture. The venue has staged shows by A-ha, Dolly Parton and Elton John, among others, and UEFA refers to it as Kristiansand Arena.

Construction began in 2006 and the stadium opened on April 15, 2007, taking over from Kristiansand Stadion as Start's home. Total spending came to 400 million Norwegian krone (NOK), with large cost overruns. It was built with a natural grass pitch even though artificial turf had been planned.

After attendance fell, the seating in the corners was sold as advertising space ahead of the 2011 season, and the maximum capacity was artificially reduced to 11,700. The main creditor, Sparebanken Sør, had taken over the venue and its holding company in 2008 and later the company running the club; Ernst Ravnaas bought both companies in 2009.

About this model

Sør Arena is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Keep exploring

More landmarks to print