3D print the Canadian Warplane Heritage Museum Hangar
A free, printable model of the Canadian Warplane Heritage Museum hangar, a wide low building with a curved roof, and the roads and open ground around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Canadian Warplane Heritage Museum Hangar
The Canadian Warplane Heritage Museum is a military aviation museum. It is located in Mount Hope, Ontario, Canada, at John C. Munro Hamilton International Airport. It displays Canadian military aircraft, many of them in flying condition. Its flying collection takes part in air shows, and museum visitors can take local flights. The Lancaster it flies is called the Mynarski Memorial Lancaster, in honor of Pilot Officer Andrew Charles Mynarski, and it carries the markings of his aircraft.
In 1972, four men, John Weir, Alan Ness, Peter Matthews and Dennis Bradley, pooled their money to buy a Fairey Firefly and moved it into Hangar 4 at Hamilton Airport. A few years later the museum bought a second hangar, Hangar 3. The collection expanded with a B-25 acquired in 1975 and a Lancaster acquired in 1977. Most of Hangar 3 was destroyed by a fire on February 15, 1993. The fire also destroyed a Hawker Hurricane, a General Motors TBM Avenger, an Auster, a Stinson 105 and a Supermarine Spitfire. Its replacement, a purpose-built hangar, was finished in 1996.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 4 mm | 1:3,750 |
| 200 mm | 5 mm | 1:3,000 |
| 256 mm | 6 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Wide curved roof
- A broad arched roof covers the whole building, with fine ridges along its surface. Layers of 0.12–0.16 mm keep the curve smooth, and a larger print size keeps the ridges visible.
- Small dome at one corner
- A small domed structure sits at one corner of the hangar. Print friendly adapts it to the print scale, while Full detail keeps its rounded form on a larger print.
- One piece with the ground
- The Canadian Warplane Heritage Museum Hangar is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Canadian Warplane Heritage Museum Hangar takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Canadian Warplane Heritage Museum Hangar is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Canadian Warplane Heritage Museum Hangar STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Canadian Warplane Heritage Museum Hangar grows with the print: about 4 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
