Cape Reinga Lighthouse in 3D
The Cape Reinga Lighthouse appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.
-
North
-
East
-
South
-
West
Copyright notice
The design of Cape Reinga Lighthouse may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.
- Real height
- 10 m
- On a 160 mm print
- 3 mm
- Scale
- 1:3,750
10 m of the Cape Reinga Lighthouse, 3 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Lattice lantern and railing
The lantern room has fine lattice glazing, and a thin railing runs around its gallery. Print friendly adapts these thin parts to the print scale; Full detail keeps them on a larger print or with a fine nozzle.
- Flared base and finial
The tower flares out at its foot and ends in a small ball above the dome. A layer height of 0.12–0.16 mm keeps the curve and the finial crisp.
- One piece with the ground
The Cape Reinga Lighthouse is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cape Reinga Lighthouse takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Cape Reinga Lighthouse
Cape Reinga Lighthouse sits on Cape Reinga, in New Zealand's North Island, within the Northland Region. Maritime New Zealand owns and runs it. The tower is 10 m tall and made of concrete. It is described as a common icon of New Zealand and a popular destination for tourists, although the public cannot go inside.
It was built in 1941 and lit for the first time that May, the last manned light constructed in New Zealand. It took over from the Cape Maria Van Diemen Lighthouse, built in 1879 on nearby Motuopao Island. Reaching that island was hard in the rough seas, so in 1938 the move to Cape Reinga was decided for safety reasons.
All the lantern fittings from Motuopao Island found a new home at Cape Reinga, though a 1000 watt electrical lamp was installed, powered by a diesel generator and visible across 26 nautical miles (48 km). The light was fully automated in 1987. In May 2000 a 50 watt beacon, charged by solar cells, took the place of the original lens and lamp. It flashes every 12 seconds and is visible from 19 nautical miles (35 km).
About this model
The Cape Reinga Lighthouse is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





