A white 3D print of Catedral Metropolitana de México, with two tall bell towers and a central dome, beside an open plaza and dense city blocks.

3D print Catedral Metropolitana de México

A free, printable model of Catedral Metropolitana de México, its two bell towers and central dome, among the plaza and dense blocks of the historic center, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Catedral Metropolitana de México model, North view North
  • Catedral Metropolitana de México model, East view East
  • Catedral Metropolitana de México model, South view South
  • Catedral Metropolitana de México model, West view West

© OpenStreetMap contributors

The model you print

Catedral Metropolitana de México in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
67 m
On a 160 mm print
18 mm
Scale
1:3,750

67 m of Catedral Metropolitana de México, 18 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open bell towers

    The two bell towers have open belfries, small domes and thin finials. Print friendly adapts these thin parts to the print scale; Full detail keeps them, and printing slowly with good cooling helps the tower tops.

  2. Domes and ribbed vaults

    A large central dome with a lantern sits among smaller domes and rows of vaulted roofs. Layers of 0.12 to 0.16 mm keep the curved roofs smooth and the facade detail crisp.

  3. One piece with the ground

    Catedral Metropolitana de México is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Catedral Metropolitana de México takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Catedral Metropolitana de México

Catedral Metropolitana de México, named for the Assumption of the Virgin Mary into heaven, serves as the cathedral of the Catholic Archdiocese of Mexico and stands on the north side of the Zócalo, the Plaza de la Constitución, in Mexico City's historic center, close to the Templo Mayor and built over what was once the Aztec sacred precinct.

Spanish architect Claudio de Arciniega planned it, taking ideas from Gothic cathedrals in Spain. It was built piece by piece between 1573 and 1813 around an earlier church built soon after the conquest of Tenochtitlan, which it finally replaced. Over just under 250 years of work it took on Gothic, Baroque, Churrigueresque and Neoclassical styles. Because the ground is swampy, around twenty thousand wooden logs were driven deep into the subsoil to support it.

The cathedral faces south and measures approximately 59 meters (194 ft) wide by 128 meters (420 ft) long, with towers 67 meters (220 ft) tall. It has two bell towers holding 25 bells, a central dome, three main portals and five naves. Coronations of Agustin I in 1822 and of Maximilian I took place there. Sinking on the soft clay put it on the World Monuments Fund endangered list until restoration stabilized it.

About this model

Catedral Metropolitana de México is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Mexico City

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits