A white 3D print of the Chapel of the Ascension, a small domed octagonal shrine with arched niches and slender columns, standing on an open paved area with buildings around its edge.

3D print the Chapel of the Ascension

A free, printable model of the small domed Chapel of the Ascension and the open paved ground around it on the Mount of Olives, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Chapel of the Ascension model, North view North
  • Chapel of the Ascension model, East view East
  • Chapel of the Ascension model, South view South
  • Chapel of the Ascension model, West view West

© OpenStreetMap contributors

The model you print

Chapel of the Ascension in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
3 mm
Scale
1:3,750

3 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Dome on an octagonal drum

    The smooth dome sits on an eight-sided base. Printing slowly with good cooling and a 0.12–0.16 mm layer height keeps the curve of the dome and the rim clean.

  2. Tiny columns and arches

    Slender columns and arches ring each side of the base, and the whole model is very small. A larger print size keeps them distinct; Full detail keeps every modeled feature.

  3. One piece with the ground

    The Chapel of the Ascension is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Chapel of the Ascension takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Chapel of the Ascension

In Jerusalem's At-Tur district, on the Mount of Olives, stands the Chapel of the Ascension, a chapel and shrine. It is part of a larger complex that began as a Christian church and monastery and later became an Islamic mosque. Since the Byzantine period, the site has been believed to be where Jesus left the earth for Heaven after his Resurrection. A slab of stone inside is believed to bear one of his footprints.

Poimenia, a wealthy aristocratic Roman woman of the imperial family, had the first church on the spot built between AD 384 and 390. Its name, the Imbomon, is Greek for "on the hill," and it was an open-air rotunda ringed by circular porticoes and arches. The Persian shah Khosrow II's armies destroyed it in 614. A rebuilding followed late in the 7th century; around 680 the Frankish bishop Arculf described the church as a circular building open to the sky.

Crusaders rebuilt the church in the 12th century. Saladin's armies later left only a partly intact outer octagonal wall, 12 by 12 meters (40 ft × 40 ft), around an inner octagonal shrine, 3 by 3 meters (10 ft × 10 ft), called a martyrium or edicule. Following Saladin's capture of Jerusalem in 1187, the chapel became a mosque with a mihrab, and he ordered a second mosque built nearby for Muslim worshippers while Christians kept visiting the main chapel.

About this model

The Chapel of the Ascension is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Jerusalem

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits