3D print the Church of Our Lady of the Snows (Prague)
A free, printable model of Our Lady of the Snows church and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Church of Our Lady of the Snows (Prague) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
14 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Fine detail on a Gothic church
Gothic churches tend to have small, closely spaced details. Choose Full detail with a larger print or a fine nozzle to keep them, or Print friendly to simplify thin parts for a smaller print.
- One piece with the ground
The Church of Our Lady of the Snows (Prague) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of Our Lady of the Snows (Prague) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of Our Lady of the Snows (Prague)
Our Lady of the Snows is a Catholic church in Prague, close to Jungmann Square. The Carmelite order founded it, along with a monastery, in 1347, when Emperor Charles IV and Blanche of Valois, his wife, were crowned. The Carmelites could not own land, and Emperor Charles donated a large plot to the order, and citizens of Prague also contributed. Money problems kept slowing construction. In the 15th century, the Hussite Wars halted building and badly damaged the church. Franciscans run the church.
The church was planned on a far larger scale than what exists. Research from the 1980s suggests it was meant to run about 110 meters, which would have made it Prague's second largest church, behind St. Vitus Cathedral. It was never finished. Only the presbytery was built to plan, with two small aisles and a large bell-tower at the west end of the northern aisle. That tower was badly damaged in the Hussite Wars and collapsed in 1683. The vault of the presbytery, at 34 meters (112 ft), is among the highest in Prague.
Over the centuries the church was altered, mainly in the Renaissance and Baroque periods and largely during the later part of the 17th century. Its early Baroque columned altar stands 29 meters high; an unknown artist made it between 1649 and 1651. In 1611 a Lutheran mob from Prague attacked and looted the monastery and killed the community of fourteen friars, who became known as the Martyrs of Prague. Pope Benedict XVI beatified them in 2012.
About this model
The Church of Our Lady of the Snows (Prague) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
