3D print the State Opera (Prague)
A free, printable 3D model of the State Opera and the surrounding streets and buildings in Prague, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
State Opera (Prague) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 13 mm
- Scale
- 1:3,750
13 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Façade detail at small scale
Fine detail on walls is the first thing to soften at small sizes. Print friendly adapts thin parts to the print scale; Full detail keeps every modeled feature, which suits a larger print or a fine nozzle.
- One piece with the ground
The State Opera (Prague) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The State Opera (Prague) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the State Opera (Prague)
In Prague stands the State Opera (Czech: Státní opera), an opera house that forms part of the Czech Republic's National Theatre. It first opened as the New German Theatre in 1888, was named the Smetana Theatre from 1949 to 1989, and was later renamed Prague State Opera. The opening of the National Theatre in 1883 stirred Prague's German community to want an opera house that would perform in German, and the Deutscher Theaterverein was founded on February 4, 1883 to raise funds.
The Viennese firm Fellner & Helmer and Karl Hasenauer, architect of Vienna's Burgtheater, developed the plans. The Prague architect Alfons Wertmüller designed the New German Theatre, which was built within 20 months. A spacious auditorium and lavish neo-rococo décor made it one of the most beautiful theaters in Europe. Its first performance, on January 5, 1888, was Die Meistersinger von Nürnberg, an opera by Richard Wagner; Angelo Neumann was the first director.
In the 1930s the New German Theatre was a refuge for artists fleeing Germany, until the German Theatre Association shut it in September 1938. The Nazi occupation turned it into the Deutsches Opernhaus. In May 1945 Czech artists set up a company called Theatre of the Fifth of May there, and in November 1949 the building became the Smetana Theatre, a second stage of the National Theatre. Following the Velvet Revolution in November 1989, it regained its independence as the Prague State Opera.
About this model
The State Opera (Prague) is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
