3D print the Church of the Most Sacred Heart of Our Lord
A free, printable 3D model of Prague's Church of the Most Sacred Heart, with the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Church of the Most Sacred Heart of Our Lord in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 42 m
- On a 160 mm print
- 14 mm
- Scale
- 1:3,750
42 m of the Church of the Most Sacred Heart of Our Lord, 14 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A broad tower wall
The church is known for its wide tower wall with a large clock. Full detail keeps small features on a larger print; Print friendly adapts thin parts and fine details to the print scale.
- One piece with the ground
The Church of the Most Sacred Heart of Our Lord is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Church of the Most Sacred Heart of Our Lord takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Church of the Most Sacred Heart of Our Lord
Prague's Vinohrady district is home to this Roman Catholic church on Jiřího z Poděbrad Square. Construction ran from 1929 to 1932 to a design by the Slovene architect Jože Plečnik, who found his inspiration in old Christian and ancient patterns. It was among three new Prague buildings prompted by the 1000th anniversary of St. Wenceslas's death, and it is considered among the most significant Czech religious buildings of the 20th century.
The wide tower wall is 42 m high and holds a huge glazed clock 7.6 m in diameter, the largest in the Czech Republic. The basement holds a roomy chapel under a wooden caisson ceiling. Inside are six statues of Bohemia's patron saints, a three-meter gilded figure of Christ and an altar of white marble.
In World War II the tower lost its six bells, which were melted down to make arms; two copies came back in 1992. Since 2010 the church has counted among national cultural monuments. The sculptor Damian Pešan (1887–1975) made the statues above the main altar and also designed the liturgical vessels.
About this model
The Church of the Most Sacred Heart of Our Lord is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
