3D print the Cinderella Castle
A free, printable model of Cinderella Castle, with its many pointed spires and round turrets, and the moat, paths and lawns around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 56 m
- On a 160 mm print
- 16 mm
- Scale
- 1:3,750
56 m of the Cinderella Castle, 16 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A crowd of thin spires
Many slender spires rise around a tall central tower. Print friendly adapts these thin tips to the print scale; Full detail keeps them on larger prints. Print slowly with good cooling.
- Round turrets and an open archway
Round turrets ring the base, and an archway opens through the front. A layer height of 0.12–0.16 mm keeps the curved shapes and the arch smooth.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cinderella Castle takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Cinderella Castle
Cinderella Castle is the fairy tale castle in the middle of Magic Kingdom at Walt Disney World. A near-twin stands at Tokyo Disneyland, and both are based on the castle in Disney's 1950 animated film of Cinderella. It is described as the symbol and flagship attraction of its park. Its chief designer, Herbert Ryman, drew on real and fictional palaces, among them Neuschwanstein Castle in Bavaria, Chambord and Craigievar Castle in Scotland, as well as Notre-Dame de Paris's spire.
Construction took about 18 months and finished in July 1971. Measured from water level, it stands 183 feet (56 m) tall, or 189 feet (58 m) when the 6 foot (1.8 m) depth of the moat at the bridge is added. Forced perspective makes it look larger than it is, since stones, windows and doors shrink in scale toward the top. It rises over 100 feet (30 m) higher than Sleeping Beauty Castle, which is at Disneyland in Anaheim, California. Its design echoes the flamboyant late-Gothic style of the 1400s.
No bricks were used in it, whatever its looks suggest. The inner structure is a steel-braced frame weighing six hundred tons, ringed by a reinforced concrete wall 10 inches (250 mm) thick. Most of the exterior is thick, hard fiber-reinforced gypsum plaster, and the gold colors are anodized aluminum. A moat around it holds about 12,800 m3 of water (3.37 million US gallons), and unlike Sleeping Beauty Castle's drawbridge, the bridge cannot be raised.
About this model
The Cinderella Castle is one of more than 4,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
