3D print Spaceship Earth
A free, printable model of the Spaceship Earth sphere on its legs, with the paths, plazas and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Spaceship Earth in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 55 m
- On a 160 mm print
- 15 mm
- Scale
- 1:3,750
55 m of Spaceship Earth, 15 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Faceted sphere on slim legs
The sphere is covered in small triangular facets and rests on slim legs. Print friendly adapts the facets to the print scale; Full detail keeps every one, which suits a larger print and a layer height of 0.12-0.16 mm.
- One piece with the ground
Spaceship Earth is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Spaceship Earth takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Spaceship Earth
Spaceship Earth is a dark ride housed inside a geodesic sphere at EPCOT, in Bay Lake, Florida, within Walt Disney World. Since EPCOT opened in 1982, the sphere has stood as the park's symbolic structure. The ride lasts 15 minutes and shows scenes of communication breakthroughs through history, from cave paintings and hieroglyphs to the alphabet, the printing press and the internet.
Its texture echoes that of the American pavilion at Montreal's Expo 67, yet it is a full sphere on three pairs of legs. Wallace Floyd Design Group conceived the architectural design, and Simpson Gumpertz & Heger Inc. of Boston completed the structural designs. Geometrically, it comes from a Class 2 geodesic polyhedron, and it has 11,324 silvered facets. Construction took 26 months, and the science fiction writer Ray Bradbury helped design the structure.
The look of a single sphere is a structural trick: it is really two structural domes, one above and one below a steel ring at its perimeter. The legs stand on pile groups that reach as deep as 160 feet (49 m) in the soft ground of Central Florida. A cladding sphere of shiny Alucobond panels stands about three feet off the structure. Rain drains through one-inch gaps between the facets into gutters, and flows on to the World Showcase Lagoon.
About this model
Spaceship Earth is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Outside the United States this design may still be protected; check the rules where you sell.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Same skyline




