A white 3D print of the Cinquantenaire Arch, a triple arch with a statue group on top and two curved colonnades, set in a large park with paths and low buildings around it.

3D print the Cinquantenaire Arch

A free, printable model of the Cinquantenaire Arch, a triple arch with a statue group on top and curved colonnades, and the park and buildings around it, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Cinquantenaire Arch model, North view North
  • Cinquantenaire Arch model, East view East
  • Cinquantenaire Arch model, South view South
  • Cinquantenaire Arch model, West view West

© OpenStreetMap contributors

The model you print

Cinquantenaire Arch in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

Real height
45 m
On a 160 mm print
13 mm
Scale
1:3,750

45 m of the Cinquantenaire Arch, 13 mm on your shelf

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Quadriga on top

    The statue group on top of the arch has small horses and a charioteer. Print friendly adapts them to the print scale; a larger print or Full detail keeps more of the figures.

  2. Long curved colonnades

    Two curved arcades sweep out from the arch, with rows of slim columns. A larger print size and 0.12–0.16 mm layers keep the columns distinct.

  3. One piece with the ground

    The Cinquantenaire Arch is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Cinquantenaire Arch takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About the Cinquantenaire Arch

The Cinquantenaire Arch is the centerpiece of the Cinquantenaire Arcade, a memorial arcade in the middle of the Parc du Cinquantenaire, also called Jubelpark, in Brussels, Belgium. The arch has three bays of equal size and measures 30 meters (98 ft) wide and 45 meters (148 ft) high. A bronze quadriga crowns it, with a female charioteer who represents the Province of Brabant raising the national flag. Thomas Vinçotte made the group, titled Brabant Raising the National Flag, and Jules Lagae made the horses.

King Leopold II was the patron of the project that the Belgian government commissioned for the 1880 National Exhibition, with the arcade as part of it, to commemorate 50 years since the Belgian Revolution. In 1880 the column bases were all that was finished, and wooden panels formed the rest of the arch during the exhibition. The architect Gédéon Bordiau conceived the original single arch. After his death in 1904, Leopold II chose the French architect Charles Girault, who revised the design into a triple arch while keeping Bordiau's idea of the quadriga.

Work on the new arch's foundation took place on January 4, 1905, and the basic construction was finished in May of that year with private funding. Leopold II inaugurated the arcade on September 27, 1905, ready for Belgian independence's 75th anniversary. Protected status followed on June 29, 1984. Leading artists of the day were entrusted with its decoration and sculptures.

About this model

The Cinquantenaire Arch is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Brussels

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits