3D print CityScape Phoenix
A free, printable model of CityScape Phoenix, with its towers and retail block, and the downtown streets around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About CityScape Phoenix
The complex fills three blocks at the center of Downtown Phoenix, with First Avenue and First Street marking its west and east sides and Washington and Jefferson streets its north and south. It combines residential, retail, office and hotel space. Part of it was built on land that had been Patriots Square Park, under an agreement with the City of Phoenix to redevelop the site.
Phase I is an office tower, Class A, with 27 stories. Beside it, a second high-rise has two uses: its first 10 floors hold the 242-room boutique Hotel Palomar Phoenix, which opened in July 2012, and floors 11 through 24 hold the CityScape Residences, with 224 luxury apartments and penthouse units on the top floors.
More than a dozen restaurants, bars and food shops operate there, along with a few entertainment, fitness and other retail outlets. Two underground garages sit under the office tower and under the retail block on the west. It is served by the Valley Metro Rail, with stops at Washington Street and Central Avenue and at Jefferson and First Avenue.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 32 mm | 1:3,750 |
| 200 mm | 39 mm | 1:3,000 |
| 256 mm | 50 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Flat roofs with small units
- The towers and the low retail block all have flat roofs with small rooftop boxes. Print friendly adapts them at small sizes; a larger print or Full detail, with 0.12–0.16 mm layers, keeps them crisp.
- One piece with the ground
- CityScape Phoenix is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. CityScape Phoenix takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
CityScape Phoenix is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a CityScape Phoenix STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. CityScape Phoenix grows with the print: about 32 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
