3D print the Clark County Government Center
A free, printable model of the Clark County Government Center, with its stepped buildings, pyramid and circular courtyard, and the roads and lawns around it, generated from real map data in your browser.
Free, in your browser. Exports a slicer-ready 3MF.
About the Clark County Government Center
The Clark County Government Center in downtown Las Vegas, Nevada, is the seat of government for Clark County. Both the Clark County Commission and its appointed county executive have their chambers and offices in the complex, and most county services, among them the clerk, recorder and assessor, are headquartered there.
Fentress Bradburn designed the complex, which covers 350,000 square feet (33,000 m2) and opened in 1995. The parts include a six-story administration building for the county, three single-story buildings that house the commissioners' chambers, a central plant and a multipurpose community facility. A cylindrical reception hall of six stories, a pyramid-shaped cafeteria and a single-story auditorium are among the other buildings.
The layout centers on a courtyard with a shaded pedestrian walkway, and a shaded circular arcade adds to the round shapes of the buildings. Three rows of trees, aligned radially with the columns, frame a sloped lawn amphitheater. The amphitheater covers an acre and a half and is 280 feet (85 m) in diameter. Before the center, the Union Pacific railroad ran a maintenance hub on the site.
How it prints
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
| Print size | Landmark height | Scale |
|---|---|---|
| 160 mm default | 13 mm | 1:3,750 |
| 200 mm | 16 mm | 1:3,000 |
| 256 mm | 20 mm | 1:2,344 |
-
North
-
East
-
South
-
West
- Circular arcade and pyramid
- The thin circular arcade around the courtyard and the sharp point of the pyramid are the delicate parts. Print friendly adapts them to the print scale; Full detail keeps them at larger sizes and a finer layer height.
- One piece with the ground
- The Clark County Government Center is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
- In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
- Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Clark County Government Center takes the building color.
- File format
- You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About this model
The Clark County Government Center is one of more than 2,300 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Common questions
Is there a Clark County Government Center STL I can download?
Mini Skyline builds the file for you in your browser and exports 3MF, which every major slicer opens. If you need an STL, open the 3MF in your slicer and export it from there.
How big can I print it?
Any print size from 40 mm across. The Clark County Government Center grows with the print: about 13 mm tall on the default 160 mm print. For a model larger than your printer bed, Project Mode splits the area into tiles.
Is it free?
Yes. Generation runs in your browser, with no account and nothing behind a paywall.
