3D print the Connecticut State Capitol
A free, printable model of the Connecticut State Capitol in Hartford, with its tall domed tower and steep pointed roofs, set among lawns, paths, roads and larger buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Connecticut State Capitol in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 78 m
- On a 160 mm print
- 21 mm
- Scale
- 1:3,750
78 m of the Connecticut State Capitol, 21 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slim tower and cupola
The domed drum with its small cupola and spire is the thinnest, tallest part of the model. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep it crisp.
- Pointed turrets and gables
Small pointed roofs and gables sit around the building. A larger print keeps them; Print friendly adapts the thinnest tips, while Full detail keeps every modeled feature.
- One piece with the ground
The Connecticut State Capitol is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Connecticut State Capitol takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Connecticut State Capitol
The Connecticut State Capitol sits in Hartford, the capital of Connecticut, between Capitol Avenue to its south and Bushnell Park to its north. It houses the Connecticut General Assembly, which has two chambers, the State Senate and the House of Representatives, and it also holds the Governor's office. The Connecticut Supreme Court sits in a separate building across Capitol Avenue, built between 1908 and 1910.
Richard M. Upjohn's design won the competition, but the stone importer James G. Batterson, who became the building contractor, kept revising the plan until it matched his own more closely. The central tower is Batterson's, not Upjohn's. Work started in 1871 and finished in 1878, and the building opened to the General Assembly in January 1879. Those changes more than doubled the cost, which came to over $2,500,000. It is the third capitol building the state has had since the American Revolution.
Its style is Eastlake, mixed with French and Gothic Revival elements, and it ranks among the largest buildings in that style. The exterior uses marble from East Canaan, Connecticut, together with granite from Westerly, Rhode Island. The central tower reaches 78.3 m (257 ft): a drum of 22.9 m (75 ft) carries a dome 9.8 m (32 ft) tall, topped by a cupola 16.8 m (55 ft) high. The main walls are 21.3 m (70 ft) high.
About this model
The Connecticut State Capitol is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.
Keep exploring





