3D print the Delftse Poort
A free, printable model of Delftse Poort and the station area around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 151 m
- On a 160 mm print
- 41 mm
- Scale
- 1:3,750
151 m of the Delftse Poort, 41 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Print the taller tower slowly
The taller of the two towers makes this a tall print. Print slowly with cooling, and use layers of 0.12 to 0.16 mm so the tower tops stay crisp.
- One piece with the ground
The Delftse Poort is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Delftse Poort takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Delftse Poort
Delftse Poort is a skyscraper complex of two towers at Weena 505, beside Rotterdam's Centraal station. Tower I is 151.35 meters (496.6 ft) tall with 41 stories, and Tower II is 93 meters (305 ft) tall with 25 stories. Both rise from a four-story podium that adjoins the station. The complex has 28 elevators. The offices take up 66,000 m2, equivalent to 710,000 sq ft. Tower I remained the country's tallest office tower until May 2009.
The complex was built between 1988 and 1991. A metro tunnel runs underneath it, so advanced construction methods were needed and only one underground floor could be built. It was long known as the Nationale-Nederlanden building because that Dutch company was its main user until 2015. CBRE Global Investors, its owner, reopened it in April 2015 for general office use, with 65,000 m2 of office space, or 700,000 sq ft.
About this model
The Delftse Poort is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
