3D print the Donauturm
A free, printable 3D model of the Donauturm rising from the Donaupark in Vienna, with the surrounding park and buildings, built from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 252 m
- On a 160 mm print
- 68 mm
- Scale
- 1:3,750
252 m of the Donauturm, 68 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A slender shaft and mast
A slender tower on a small footprint, so the shaft and the top suffer most when printed small. Print slowly near the top and use 0.12–0.16 mm layers to keep them clean.
- One piece with the ground
The Donauturm is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Donauturm takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Donauturm
The Donauturm is a tower in the Donaupark in Vienna. It opened in April 1964 as an attraction for the 1964 Vienna International Garden Show and stands 252 meters (827 feet) tall, the tallest structure in Austria. Hannes Lintl and Robert Krapfenbauer designed it; workers laid the foundation stone on October 12, 1962, and it opened on April 16, 1964, the garden show's opening day. Most of the financing came from the Zentralsparkasse, and the Schwechat Brewery contributed a small amount.
Two high-speed elevators carry passengers to a viewing platform at 150 meters (490 feet); each lift holds up to 14 people and takes 35 seconds. In strong winds they run at half speed. About 779 steps also reach the platform, though the stairs are usually open only for the yearly Donauturm run or an emergency.
Two revolving restaurants, at 161.2 and 169.4 meters (529 and 556 feet), give a changing view over Vienna and the Danube below; a full turn takes 26, 39 or 52 minutes. The spire carries antennas for cellular phone networks, private VHF radio and other services, but the tower has not been used for television broadcasting; the main transmitter for Vienna stands on the Kahlenberg.
About this model
The Donauturm is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
