A white 3D print of Édifice Ernest-Cormier, a large flat-roofed courthouse with a colonnade on one side and two open light wells in the roof, packed among mid-rise buildings.

Édifice Ernest-Cormier in 3D

Édifice Ernest-Cormier appears in city models you make here; its design may still be protected, so it isn't offered as a separate download.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Édifice Ernest-Cormier model, North view North
  • Édifice Ernest-Cormier model, East view East
  • Édifice Ernest-Cormier model, South view South
  • Édifice Ernest-Cormier model, West view West

© OpenStreetMap contributors

Copyright notice

The design of Édifice Ernest-Cormier may still be protected by copyright. It appears in the city models you make here, but it is not offered as a separate model.

On a 160 mm print
7 mm
Scale
1:3,750

7 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Colonnade and cornice

    Tall columns line one front, and a detailed cornice runs around the roofline. Print friendly adapts the columns to the print scale; Full detail keeps them on a larger print, with a 0.12–0.16 mm layer height.

  2. Light wells and roof lights

    Two open light wells and several low roof lights break up the flat roof. A bigger print size keeps these shallow features visible.

  3. One piece with the ground

    Édifice Ernest-Cormier is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Édifice Ernest-Cormier takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Édifice Ernest-Cormier

Édifice Ernest-Cormier is a courthouse in Montreal, Canada, at 100 rue Notre-Dame Est. It was the second courthouse in the city called Palais de justice de Montréal. It stands across the street from the first one, Édifice Lucien-Saulnier, and from the current courthouse.

Construction ran from 1922 to 1926. Ernest Cormier worked on the design with Louis-Auguste Amos and Charles Jewett Saxe. Cormier had come back to Montreal after studying in Paris, and the courthouse was his first major commission. It lies in Ville-Marie.

The building was given Cormier's name in 1980, after he died. It is a Neoclassical building with four floors above ground, and it was classified as a heritage immovable on November 13, 2014. The Quebec Court of Appeal is housed there.

About this model

Édifice Ernest-Cormier is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Same skyline

More landmarks in Montreal

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits