A white 3D print of Engaku-ji, a two-tiered temple hall with sweeping eaves, beside a stream on a green hillside with a few buildings.

3D print Engaku-ji

A free, printable model of a two-tiered temple hall at Engaku-ji, with its sweeping eaves, and the greenery, stream and buildings around it in Kamakura, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Engaku-ji model, North view North
  • Engaku-ji model, East view East
  • Engaku-ji model, South view South
  • Engaku-ji model, West view West

© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)

The model you print

Engaku-ji in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
5 mm
Scale
1:3,750

5 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Sweeping layered eaves

    Two tiers of wide, upturned eaves extend well past the walls, with fine bracket details beneath. Print friendly adapts the thin roof edges to the print scale; Full detail on a larger print keeps more of the brackets.

  2. One piece with the ground

    Engaku-ji is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  3. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  4. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Engaku-ji takes the building color.

  5. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Engaku-ji

Engaku-ji (Zuirokusan Engaku Kōshō Zenji) ranks among Japan's most significant Zen Buddhist temple complexes and holds second place among Kamakura's Five Mountains. It lies in Kamakura, in Kanagawa Prefecture south of Tokyo. The Zen monk Mugaku Sōgen from China (1226–1286) founded it in 1282 at the request of the regent Hōjō Tokimune, after Tokimune had repelled a Mongolian invasion between 1274 and 1281. The temple was meant to honor the dead on both sides of the conflict.

Records from the period say that at the start of construction, workers unearthed a stone chest in the hillside containing the Sutra of Perfect Enlightenment (engaku-kyō), which gave the temple its name. Its present form owes much to Seisetsu Shucho (1745–1820), a Zen priest who reconstructed and consolidated it toward the end of the Edo era. During the Meiji era the temple turned into the main center for teaching Zen in the Kantō region.

The buildings climb a wooded slope, and the largest halls are aligned in a row. The two-storied main gate, the Sanmon, was rebuilt in 1785, and its roof is covered with copper. The Shariden, a single-storied reliquary hall roofed with hinoki cypress bark shingles, is a National Treasure and the only building in Kanagawa Prefecture with that designation. The Great Bell, cast in August 1301, is 2.6 meters tall and is also a National Treasure.

About this model

Engaku-ji is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits