A white 3D print of Tsuruga Station, a long, boxy building with large window bays and two raised roof sections, beside a road loop and larger buildings.

3D print Tsuruga Station

A free, printable model of Tsuruga Station, a long, boxy building with large window bays and two raised roof sections, beside a road loop, generated from real map data in your browser.

Make this print Free, in your browser. Exports a slicer-ready 3MF.
  • Tsuruga Station model, North view North
  • Tsuruga Station model, East view East
  • Tsuruga Station model, South view South
  • Tsuruga Station model, West view West

© OpenStreetMap contributors · Terrain in Japan: 出典:国土地理院 (GSI elevation data via Mapterhorn)

The model you print

Tsuruga Station in 3D

The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.

Drag to turn it. Scroll or pinch to zoom.

On a 160 mm print
4 mm
Scale
1:3,750

4 mm tall on a 160 mm print

Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.

  1. Open window bays

    The long facade has deep window bays with thin frames. Print friendly adapts the thin frames to the print scale; Full detail keeps them on a larger print.

  2. Roof sections with small openings

    Two raised roof sections carry a row of small openings. A layer height of 0.12–0.16 mm and a bigger print size keep them crisp.

  3. One piece with the ground

    Tsuruga Station is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.

  4. Pick the detail for your nozzle

    In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.

  5. Colors

    Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Tsuruga Station takes the building color.

  6. File format

    You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.

About Tsuruga Station

Tsuruga Station is in Tsuruga, Fukui, Japan, and is shared by Hapi-Line Fukui and West Japan Railway Company (JR West), which manages the premises. Trains of the Obama Line, the Hapi-Line Fukui Line, the Hokuriku Main Line and the Hokuriku Shinkansen all terminate here. A freight-only branch, the Tsuruga Port Line run by JR Freight, formerly ran from the station.

The platforms fall into two areas: a long-established conventional area for local trains, and a newer Shinkansen building for long-distance trains. A pedestrian bridge from the West Exit crosses the conventional platforms and joins the concourse on the second floor of the Shinkansen building. The conventional area has seven tracks on three island platforms. At 21 meters above ground, on the third floor, the Shinkansen platforms are the tallest on the Shinkansen network, and the height lets the tracks continue over a nearby road viaduct.

Tsuruga Station opened on March 10, 1882. JR West took control of the station when JNR was privatized on April 1, 1987. In 2014, JR West opened a 180 meter variable gauge test track in the station's yards, to help develop a Gauge Change Train suited to the snowy Hokuriku environment. In 2018, Japan dropped the idea of gauge-changing Shinkansen. With the timetable revision of March 16, 2024, the Hokuriku Shinkansen reached Tsuruga.

About this model

Tsuruga Station is one of more than 6,500 landmark models in Mini Skyline. They are made with AI, and each one is checked in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.

Mini Skyline is not affiliated with, or endorsed by, the owners of this building or its names and marks.

Keep exploring

More landmarks to print

Map data © OpenStreetMap contributors, Overture Maps; elevation Mapterhorn and Mapzen · Credits