3D print Eton Place Dalian Tower 1
A free, printable model of the main tower at Eton Place Dalian and the surrounding streets and buildings of Dalian, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 388 m
- On a 160 mm print
- 105 mm
- Scale
- 1:3,750
388 m of Eton Place Dalian Tower 1, 105 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Very tall, very narrow
At print scale this tower is far taller than it is wide, so the top floors sit in a small area. Print slowly with cooling near the top, and use 0.12 to 0.16 mm layers for clean vertical edges.
- One piece with the ground
Eton Place Dalian Tower 1 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Eton Place Dalian Tower 1 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Eton Place Dalian Tower 1
Eton Place Dalian is a skyscraper complex made up of four buildings in Dalian, China. The group is a set of high-rise buildings rather than a single tower. Its tallest tower rises 388 m and contains 81 floors, and the whole development was completed in 2016, with that tower as its highest point.
The architecture firm NBBJ designed the entire complex. Within the group, the tallest tower is the one that holds the 388 m height and the 81 floors, while the other three buildings are shorter. All four buildings in the development were completed in 2016 in the city of Dalian, China.
About this model
Eton Place Dalian Tower 1 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
