3D print Eurotower (Zagreb)
A free, printable model of Eurotower and the streets and buildings around it, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Eurotower (Zagreb) in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 96 m
- On a 160 mm print
- 27 mm
- Scale
- 1:3,750
96 m of Eurotower (Zagreb), 27 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender shaft, open crown
The tower is a tall, narrow block topped by an open frame. Print slowly with good cooling, and use a layer height of 0.12–0.16 mm to keep the fine floor bands and the crown crisp.
- Landmark detail for the facade
Print friendly adapts the thin facade lines and crown frame to the print scale. Full detail keeps every modeled feature, which suits a larger print or a fine nozzle.
- One piece with the ground
Eurotower (Zagreb) is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Eurotower (Zagreb) takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Eurotower (Zagreb)
Eurotower is an office high-rise in Zagreb, Croatia. It stands in the Trnje district, where Vukovarska Street meets Lučićeva Street, at the southwest corner. The tower has 26 levels and rises 96 m (315 ft). It was completed in 2006, the year it won a Southeast Europe award named "Commercial Building of the Year".
Eurotower held the title of Croatia's tallest building until the Strojarska Business Center went up in 2015. The architect is Marijan Hržić, who also designed the Cibona Tower in Zagreb. Josip Kordić, director of Hidrocommerce, developed the project, and Porr – Croatia was the main construction contractor.
Glass encloses only part of the top floor. Most of that level is ribbed glass that throws sunlight back at particular angles, so the tower appears two-toned in overcast weather and pearlescent in sunny conditions. Lithuania's embassy to Croatia, Montenegro, Kosovo and North Macedonia is located inside.
About this model
Eurotower (Zagreb) is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
