3D print Zagrepčanka
A free, printable model of Zagrepčanka, its three-part tower and rooftop mast, and the surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Zagrepčanka in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- Real height
- 95 m
- On a 160 mm print
- 30 mm
- Scale
- 1:3,750
95 m of Zagrepčanka, 30 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Rooftop mast
A thin mast stands on top of the central tower. Print slowly with good cooling, and use Print friendly unless you print larger, where Full detail keeps the whole mast.
- Curved wings, fine vertical ribs
The side wings curve and the facade is covered in thin vertical ribs. A layer height of 0.12–0.16 mm keeps the ribs crisp.
- One piece with the ground
Zagrepčanka is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Zagrepčanka takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Zagrepčanka
Zagrepčanka, an office high-rise in Zagreb, Croatia, stands at Savska 41, where Savska Road crosses Vukovar Avenue. The tower measures 94.6 meters (310 feet) and has 27 levels. A radio mast on the roof raises the total height to 109 meters (363 feet). It has two underground levels used for parking and is served by six elevators.
The tower has three parts: a center section of 26 floors, a west wing of 21 floors and an east wing of 19 floors. The facade is white marble with reflective green glass. The side wings are hyperbolically curved around the vertical axis, and 23 three-apse protrusions run from the 25th to the 26th floor. The building is part of a complex with low business buildings, an art installation and a fountain.
Architects Slavko Jelinek and Berislav Vinković built the tower in 1976, taking the Thyssen-Haus in Düsseldorf as their inspiration. Within ten years heavy marble tiles began falling from the facade, largely because the Carrara marble resisted weather poorly. A yearly race up its staircase, Zagrepčanka 512, has run since 2012.
About this model
Zagrepčanka is one of more than 4,900 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
