3D print the Fatih Mosque, Istanbul
A free, printable model of the Fatih Mosque and its surrounding streets and buildings, generated from real map data in your browser.
-
North
-
East
-
South
-
West
The model you print
Fatih Mosque, Istanbul in 3D
The landmark on its own, at its size on a 160 mm print. Print friendly thickens thin parts for a 0.4 mm nozzle; Full detail keeps every part.
- On a 160 mm print
- 20 mm
- Scale
- 1:3,750
20 mm tall on a 160 mm print
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- Slender minarets
Mosque minarets are tall and thin. Print friendly adapts thin minarets to the print scale; printing slowly with good cooling helps tall thin parts.
- One piece with the ground
The Fatih Mosque, Istanbul is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. The Fatih Mosque, Istanbul takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About the Fatih Mosque, Istanbul
The Fatih Mosque in Istanbul's Fatih district is an Ottoman mosque named for Mehmed the Conqueror; Turks call that sultan Fatih Sultan Mehmed. At Mehmed II's order, the first mosque went up between 1463 and 1470 where the Church of the Holy Apostles had stood. It was the earliest monumental project of Ottoman imperial architecture, and the Greek architect Atik Sinan built it.
The original complex was of unprecedented size and complexity, serving religious and social needs. It had eight medreses, a library and a hospital, along with a caravanserai, a market, a hamam and a public kitchen for the poor, plus 280 shops. The complex covered an almost square area measuring 325 meters (1,066 feet). The medreses had room for about a thousand students, so the complex worked as a large university for its day.
Earthquakes damaged the first mosque repeatedly, and on May 22, 1766 one destroyed it completely when the main dome fell. Sultan Mustafa III commissioned the present mosque, built to an entirely different plan from 1767 to 1771 by Mehmet Tahir Ağa, an architect. It has a square plan and a central dome 26 meters across, carried by four semi-domes, and two minarets with twin galleries each. From the original, the courtyard, the main entrance portal and the lower minaret sections remain.
About this model
The Fatih Mosque, Istanbul is one of more than 5,500 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Each model is written as code from public descriptions, plans, photographs and aerial views used only as references; no image or third-party model is copied into it. Everything around it is built from OpenStreetMap and Overture map data. Rights in the building itself, its name and any brands on it are not granted by Mini Skyline; clear them separately before you sell prints. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Same skyline
