3D print Forum 66 Tower 1
A free, printable model of Forum 66 Tower 1 and the surrounding city, generated from real map data in your browser.
-
North
-
East
-
South
-
West
- Real height
- 384 m
- On a 160 mm print
- 104 mm
- Scale
- 1:3,750
384 m of Forum 66 Tower 1, 104 mm on your shelf
Make this print opens the generator on a 600 m square around the landmark. Buildings print at close to true scale, so the landmark grows with the print size.
- A tall tower
A tall skyscraper has little material at the top. Print slowly with good cooling, and use 0.12–0.16 mm layers to keep the upper parts clean.
- One piece with the ground
Forum 66 Tower 1 is joined to the ground in the exported file, and the four-side check found no floating parts, so nothing needs gluing.
- Pick the detail for your nozzle
In the Buildings settings, set Landmark detail to Print friendly to adapt thin parts and small details to the print scale. Full detail keeps every modeled feature, for larger prints or a finer nozzle.
- Colors
Buildings, roads, water and ground arrive as separate filament slots in the 3MF. Forum 66 Tower 1 takes the building color.
- File format
You get a 3MF for Bambu Studio, OrcaSlicer or PrusaSlicer. Any of them can save it as STL if you need one.
About Forum 66 Tower 1
Forum 66 is a two-tower complex in Shenyang, Liaoning, China. The complex is made up of two supertall skyscrapers. The taller one, Tower 1, stands 384 m (1,260 ft) tall and has 76 floors; Tower 2 is listed at 351 m (1,152 ft) and has 68 floors.
Tower 1 was finished in 2015. Hang Lung Properties developed the complex, and Kohn Pedersen Fox designed it. The buildings share the Chinese name 市府恒隆广场 with other Hang Lung projects such as Plaza 66, and the English name Forum 66 is used alongside it. The development is owned by Hang Lung Properties.
About this model
Forum 66 Tower 1 is one of more than 4,400 landmark models in Mini Skyline. They are made with AI, and each one is checked from four sides in its real surroundings before release. Everything around it is built from OpenStreetMap and Overture map data. If you would rather print the shape from map data, turn off Landmark models in the Buildings settings.
Keep exploring
